INCLINATION
VIBRATION
TEMPERATURE
HUMIDITY
PRESSURE
GPS TRACKING
LIGHT INCIDENT
- Registers the 200 largest shock events in the X, Y, Z direction
- Saves up to 10 curve progressions of the largest shocks
- Intelligent signal filtering and evaluation
- Indicates limit value overruns with alarm LED
- Continuous temperature recording
- Intuitive operation, extremely long and independent operating time
- Communication via USB
- Easy configuration and evaluation with license-free PC software
- Configurable recording time over start-stop time
- Easy mounting with adhesive pad, screws or magnetic feet
Product description:
- High-sensitivity devices, e.g. large, superconducting magnets in medical technology, need a safe and demonstrable protection during transport or during storage.
- The compact MONILOG® MicroShockDetector provides the best services.
- It is smaller than a smartphone and weighs only 180 grams.
- The measuring device reliably stores all data on shocks of every dimension, assigns them to acceleration classes, provides curve progressions and reports alarms as soon as limit values are exceeded.
- In addition, the temperature is monitored.
- The switch-on time of the MicroShockDetector is easy to configure.
- All data can be read out via the USB port, transferred to a PC and evaluated.
- The device is quickly installed and dismantled with adhesive pads, screws or supplied magnetic holding feet.
- Due to the good economic and ecological parameters, the data logger can also be used only once.
Technical data:
Shock parameters:
200 data records with the highest space vector amplitude, of which the 10 highest values with a curve-plots over 4 s, resolution 2 ms
Acceleration sensor:
3D-MEMS, measuring range ±8 g, 10 mg resolution, accuracy: ±(0.2g and 2% measurement value),
registering threshold from 0.25g,
lower limit frequency 1 Hz,
upper filter limit frequency 25 Hz fixed-adjusted
Shock classification:
Subdivision of shocks according to space vector amplitude into classes, number of shocks not limited >0.25 g, >0.5 g, >1 g, >1.5 g, >2 g, >3 g, >4 g, >5 g
Temperature measurement:
-40°C to +65°C ±1 K, 100,000 measurement values
Indication:
2 LEDs for status and alarm limit-value overshooting
Operating elements:
1 button for status indicator, ON/OFF switching with password protection
Connections:
Mini USB 2.0
Operating and storage conditions:
-40°C to +65°C, max. 98% rel. humidity
Power supply:
1 replaceable lithium cell, 3.6 V type LR06 (AA, Mignon), lithium content ~0.7g,
runtime typically 3 years in switch-on time period (depending on the device configuration)
Data storage:
Receipt of measuring data independent of battery status for a minimum of 10 years
Dimensions:
106 x 48 x 33 mm (LxWxH), 126 x 48 x 40 mm (LxWxH with magnetic feet)
Housing:
Plastic housing with stainless steel base
Weight:
approx. 172 g (258 g total if mounted on magnetic feet)
Protection type:
IP 67
Programmable parameters:
X, Y, Z registering threshold, X, Y, Z alarm threshold, minimum shock duration, temperature-measurement interval;
Start-Stop time (switch-on time period), password protection by means of free Windows software
Conformity:
Device certification according to CE, UKCA, IC, FCC, RoHS, REACH, WEEE;
Use according to IEEE C 57.150-2012